Description

UNMATCHED BED ADHESION

Designed for PEEK, ULTEM™, PPSU, and other high-performance FDM polymers, this build plate glue works for nearly every filament – Nylon, ABS, ASA, PLA, PETG, PC, PEI, PSU, and almost every filament we’ve tested.

WORKS ON MOST SURFACES:

Borosilicate Glass, Ceramic Glass, PCB board, FR4, Garolite, Carbon Fiber, Creality Glass (non-coated), Fiberglass, BuildTak™, PEI, WhamBam, Flex Plates, Kapton tape, and more. Activates with a heated buildplate over 60ºC

•    • Designed for PEEK, PEI, and High-Temp Materials
•    • NO MESS like Glue Stick or Hair Spray – Better Grip
•    • Works on Many Surfaces (glass, carbon, resins, etc)
•    • Easy to Clean and Re-Apply
•    • Works with Normal-Temp Materials like PLA, PETG, ABS, ASA, and Nylons
•    • Made from Safe, Non-Toxic, Organic Compounds
•    • Can even Refresh Stratasys^® Build Sheets
•    • Withstanding Pull-Force Pressures Over 20,000 PSI, this Adhesive Works on Multiple Surfaces
•    • PLA and PETG can Use the Same Coating 50+ Times
•    • Each Bottle has Over 300 7″x7″ Coatings Worth of Adhesive

Extremely EASY to use

•    • Clean Glass (use water, windex, or alcohol)
•    • Apply Adhesive (spread evenly on Build Area)
•    • Activates above 60ºC – Heat up the Buildplate
•    • Calibrate the First Layer Height
•    • Print Part
•    • Remove part

We have been using this adhesive since we started our business (nearly three years ago) with excellent results!

Contact us with any questions you have.